Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Just needs a neck! 0-12 body done!
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10619		 Page 1 of 2
Author:  LanceK [ Mon Jan 29, 2007 1:53 pm ]
Post subject: 
Well, this evening I scraped the bindings on the little 0-12. The body is all done, the neck is roughed out and will be my focus for the next week. I hope to have this one in finish with in the next two weeks.
The bindings are Brazilian rosewood with a b/w/b side purflings and the top has a Koa/b/w/b purfling scheme.
This is also the first guitar that I have used what I call petite binding on, They are .180 tall, instead of the .250 that I have always used. I think this will add a nice touch to my guitars.

Thanks for looking!







LanceK39111.9146064815
Author:  burbank [ Mon Jan 29, 2007 1:56 pm ]
Post subject: 
Wow, Lance, she's a beaut!!
Author:  old man [ Mon Jan 29, 2007 2:07 pm ]
Post subject: 
Wow, that's beautiful, Lance! How about a closeup of the rosette?

Ron
Author:  peterm [ Mon Jan 29, 2007 2:13 pm ]
Post subject: 
Smashing baby!!!

looks awesome!
Author:  Darin Spayd [ Mon Jan 29, 2007 2:17 pm ]
Post subject: 
In your word.....Schweeeet!
Author:  John Mayes [ Mon Jan 29, 2007 2:26 pm ]
Post subject: 
very nice Lance.. I've always used .190 binding and then add the purfling
and it equals about .250. I love the look and your guitar there is no
different!

Author:  Dave Anderson [ Mon Jan 29, 2007 2:42 pm ]
Post subject: 
Very,cool little guitar Lance. Looks beauteeful!!
I like your petite bindings.Gorgeous coco too.
Author:  Andy Zimmerman [ Mon Jan 29, 2007 4:25 pm ]
Post subject: 
Absolutely Gorgeous....your work is always so flawless!!!!!
Author:  LarryH [ Mon Jan 29, 2007 4:40 pm ]
Post subject: 
Great looking little guitar - love the 12 fretters and as everyone has said very clean. I especially like the end wedge.
Author:  Serge Poirier [ Mon Jan 29, 2007 4:45 pm ]
Post subject: 
Looking great Lance!
Author:  outstrung [ Mon Jan 29, 2007 4:45 pm ]
Post subject: 
Lovely!
Author:  Bobc [ Mon Jan 29, 2007 10:54 pm ]
Post subject: 
Zootalicious!!!!!!!!!!!
Author:  Matt Gage [ Mon Jan 29, 2007 11:36 pm ]
Post subject: 
Thin is in baby!   Mr.Clean strikes again!

looking good Lance.
Author:  LanceK [ Mon Jan 29, 2007 11:38 pm ]
Post subject: 
Thank'ee fellers!
I promise this is the last group of pictures of this one. ---------- Until the neck is done

Ron, Ill try to get a shot of the rosette, right now all I have are from a distance. That said, its not terribly distinct, its made form a deep chocolate brown Brazilian, so its basically looks like chocolate
Author:  Dale R. Kirby [ Mon Jan 29, 2007 11:45 pm ]
Post subject: 
Sweet Lance,  I really like the nice, thin end stripe.
Author:  Dave Rector [ Tue Jan 30, 2007 1:19 am ]
Post subject: 
Very nice! Can I have it?
Author:  LanceK [ Tue Jan 30, 2007 1:25 am ]
Post subject: 
Hesh, sure is! Good stuff eh!
Author:  Bruce Dickey [ Tue Jan 30, 2007 1:45 am ]
Post subject: 
Very classy, congrats on another great looking box.
Some lucky guy or gal is going to be braggin' for a lifetime. Go Lance go!
Author:  LarryH [ Tue Jan 30, 2007 3:12 am ]
Post subject: 
Lance I was wondering, if you use a lower binding height don't you have to plan your bracing letin to be smaller as well so your brace ends won't show?
Author:  LanceK [ Tue Jan 30, 2007 3:22 am ]
Post subject: 
Larry, my bracing dont stick through the sides.. But yes, if they did, you would have to be aware of that.
Author:  Arnt Rian [ Tue Jan 30, 2007 3:24 am ]
Post subject: 
Looks great, Lance. I use a similar binding height as well.
Author:  charliewood [ Tue Jan 30, 2007 5:36 am ]
Post subject: 
Absolutely beautiful! no doubt about that,
That is gonna make some player very very happy!
Cheers
Charliewood
Author:  Andy Zimmerman [ Tue Jan 30, 2007 5:43 am ]
Post subject: 
Hey Lance
Was this the 4 piece back you got from Brock???
Author:  LanceK [ Tue Jan 30, 2007 5:51 am ]
Post subject: 
Hi Andy, yes this is the one --

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/